Kitchen Drawer Organizer Layout Checker
As an Amazon Associate, this website earns from qualifying purchases.
Enter your drawer size to find bin layouts and see the space left over.
Enter your drawer width and depth to see which bins fit.
Along the depth
No bin layout fits
No fixed-size bin in this reference fits those measurements. Reduce the gap, check a different drawer, or look for a smaller organizer.
A width layout is a starting point. Confirm each bin’s depth and height before buying.
Complete your measurements to save this layout on this device.
Other layout options
Drawer organizers mostly fail on width. This checker takes the fixed-footprint bins and trays we have sourced sizes for, and works out the most that fit across your measured drawer, the tightest fill, and how many rows can lie along the depth. It is straight addition against the numbers you give it, with a gap between bins you can set, and it makes no claim about what a drawer or a bin can hold.
How the layouts are worked out
Measure a drawer, and see how many sourced fixed-footprint bins and trays fit across its width and how many rows can lie along its depth, with the arithmetic and each bin's source shown.
Each bin is a rectangle of its stated width and depth. Across the drawer, the widths add up:
width of bin 1 + gap + width of bin 2 + ... ≤ your drawer width
The checker tries the fixed-width bins in the reference to find the most bins and the tightest fill for your measurements. It can repeat a bin size where that helps, and leaves out bins wider than the drawer. The list shows up to 20 different selections, rather than every possible order of the same bins.
It ignores drawer sides, runners, dividers, sloping or shaped drawer fronts, and anything already in the drawer. It does not check the drawer's load or the bins' strength, and a combination that fits by arithmetic may still not suit how you actually use the drawer. Measure your clear internal width, not the drawer front.
Flexible fillers (not counted above): these trays have an expandable width, so they have no single footprint and are excluded from the count. Size one to the gap you want: OXO 13321900 (9.8 to 18.05 in wide) , OXO 13322000 (7.33 to 12.83 in wide) , Totally Bamboo Expandable 5-Compartment (13 to 22 in wide) , Seville Classics Acacia expandable 3-to-5-compartment tray (13 to 23 in wide) , mDesign 15160MDK (11 to 18 in wide) , SpaceAid 17-22 in divider set (17 to 22 in wide) , Lifewit medium slim (8.1 to 13.9 in wide) .
Every bin's size comes from our sourced dimension reference, with a source for each bin and source dates in the CSV download. Checking a single pull-out instead? Use the pull-out fit checker.